Results 1 to 10 of 10

Thread: Tuning Help: How to convert .txt map

  1. #1
    Junior Member
    Join Date
    Jan 2020
    Posts
    14

    Tuning Help: How to convert .txt map

    Looking for some help with tuning. It seems like the current version of ECMSpy (2.0.31.2) can't flash .txt files (I already have the tunes) directly and they need to be converted. How is this done? I've searched and cannot find a direct answer or process other than with the older software versions.

    2004 XB12S with a BUEGB ECM.

  2. #2
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    470
    I looked and didn't see that, but I use TunerPro and ECMDroid. I swear I saw steps for that but I may be mixing a couple procedures together...

  3. #3
    Junior Member
    Join Date
    Jan 2020
    Posts
    14
    Unfortunately I don’t have an Android device at the moment, but if that’s a solution I can find one.

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,967
    Sorry, can't help you with ECMSpy, but you can use a Windows emulator on your Mac to run Android stuff, but honestly it's much easier to get an Android burner phone. You probably have a buddy with a couple in the kitchen drawer and you don't even need a SIM card.

  5. #5
    Junior Member
    Join Date
    Jan 2020
    Posts
    14
    Do .txt's work with ECMDroid? I have a Windows comp

  6. #6
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    470
    Cant help ya on that one either, however...
    https://www.buelltooth.com/linksresources.html

    I just started messing with my tune, and my procedure is:

    datalog with a tablet
    transfer log/ecm data to computer
    MLV the datalog
    Tunerpro to make changes, and then to burn to the bike.

    Rinse and repeat.

    Obviously missing the required steps to setup the ecm in order to datalog. Which also depends on what your tweaking. I'm only working on my WUE. I take notes on how it first starts and tweak from there.

  7. #7
    Senior Member
    Join Date
    Jun 2018
    Posts
    470
    works with android.

  8. #8
    Junior Member
    Join Date
    Jan 2020
    Posts
    14
    I've got it figured out, the key was to find an old version of ECMSpy and following this video:https://www.youtube.com/watch?v=Si4uTol-J-I&t=611s. Low RPM driveability is much better, as is butt-dyno responsiveness. I had to run it around town slowly for ~20 miles to let it adapt after a TPS reset. Hopefully this helps anyone looking to do the same in 2020.

  9. #9
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,012
    THANK YOU SO MUCH FOR POSTING THIS!!!!

    I am being serious. So many times, people solve their issue and don't report back.

    You are awesome sir!

  10. #10
    Junior Member
    Join Date
    Jan 2020
    Posts
    14
    You bet. Feel free to PM me with any questions on how to do certain steps.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •