What parts for tall bars please

[Kuell]

2009 1125CR. Want to take the clubmans off and replace with the EBR tall replacement bars. I have the bars. If I understand right I need throttle cables and hydro lines. Is this right? Part numbers? Get from Harley or???

Or point me to the thread with this info, could not find it.

HELP.

We thank you...

20200327_173416.jpg

K

[34nineteen]

Just buy this.

https://st-paul-harley-davidson-buel...-kit-n2002-1at

Or I will sell you these. Cooter said he will throw in a sheepskin seatcover. 38933D51-583B-4E98-AA8A-54811D1997E2.jpeg

Njloco once said: “Chrome won’t get you home, but it might get you laid” or so I heard.

[34nineteen]

20200327_173416.jpg

Some say 1125’s are ugly with the pods, but from the right angles they sure look awesome!

[34nineteen]

Someone on the other forum is looking for Clubman bars. You may want to see if you can strike up a deal.

[rb70383]

What are those lights under the levers?
I always liked the look of the pods...

[Cooter]

This was the pic that started me down my red lobster path They're just so MEAN looking in a Darth Vader just got cut off on the 405 kinda way.

AB2C832D-FCF1-4936-91C1-7E08DB502264_1_105_c.jpg

Like I said Kuell, I'd put the high bars on and see if the cables and brake line are long enough to have clearance lock to lock. If they don't, just pop the clubmans back on so you can still ride, and then order the stuff. Its only 3/4 of a beer job to swap bars over

[Kuell]

Just buy this.

https://st-paul-harley-davidson-buel...-kit-n2002-1at

Or I will sell you these. Cooter said he will throw in a sheepskin seatcover.

Njloco once said: “Chrome won’t get you home, but it might get you laid” or so I heard.

WTF? No. I get laid enough so I'm running the black tapers. I ride a lot of off road and prefer that position. Although I must say, the cubmans are not as bad as I assumed they would be.

[Kuell]

20200327_173416.jpg

Some say 1125’s are ugly with the pods, but from the right angles they sure look awesome!

I hated them until I saw them in person. The bike is so low and looks ready to pounce. I like the pods now.

20200402_193551.jpg

[Kuell]

So after is was all said and done I just ordered the whole kit via St Paul Harley. I was going to get the throttle cables and get hoses made local as I have the bars. After sorting it all out it is cheaper to just get the whole kit. Now I have two sets of tall bars but that's OK.

[Kuell]

So much better!!!

20200408_194818.jpg

20200408_194849.jpg