Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: What parts for tall bars please

  1. #1

    What parts for tall bars please

    2009 1125CR. Want to take the clubmans off and replace with the EBR tall replacement bars. I have the bars. If I understand right I need throttle cables and hydro lines. Is this right? Part numbers? Get from Harley or???

    Or point me to the thread with this info, could not find it.

    HELP.

    We thank you...

    20200327_173416.jpg

    K

  2. #2
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    1,765
    Just buy this.

    https://st-paul-harley-davidson-buel...-kit-n2002-1at

    Or I will sell you these. Cooter said he will throw in a sheepskin seatcover. 38933D51-583B-4E98-AA8A-54811D1997E2.jpeg

    Njloco once said: “Chrome won’t get you home, but it might get you laid” or so I heard.
    Last edited by 34nineteen; 04-02-2020 at 01:53 AM.

  3. #3
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    1,765
    20200327_173416.jpg

    Some say 1125’s are ugly with the pods, but from the right angles they sure look awesome!

  4. #4
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    1,765
    Someone on the other forum is looking for Clubman bars. You may want to see if you can strike up a deal.

  5. #5
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    445
    What are those lights under the levers?
    I always liked the look of the pods...

  6. #6
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,666
    This was the pic that started me down my red lobster path They're just so MEAN looking in a Darth Vader just got cut off on the 405 kinda way.

    AB2C832D-FCF1-4936-91C1-7E08DB502264_1_105_c.jpg

    Like I said Kuell, I'd put the high bars on and see if the cables and brake line are long enough to have clearance lock to lock. If they don't, just pop the clubmans back on so you can still ride, and then order the stuff. Its only 3/4 of a beer job to swap bars over

  7. #7
    Quote Originally Posted by 34nineteen View Post
    Just buy this.

    https://st-paul-harley-davidson-buel...-kit-n2002-1at

    Or I will sell you these. Cooter said he will throw in a sheepskin seatcover.

    Njloco once said: “Chrome won’t get you home, but it might get you laid” or so I heard.
    WTF? No. I get laid enough so I'm running the black tapers. I ride a lot of off road and prefer that position. Although I must say, the cubmans are not as bad as I assumed they would be.

  8. #8
    Quote Originally Posted by 34nineteen View Post
    20200327_173416.jpg

    Some say 1125’s are ugly with the pods, but from the right angles they sure look awesome!
    I hated them until I saw them in person. The bike is so low and looks ready to pounce. I like the pods now.

    20200402_193551.jpg

  9. #9
    So after is was all said and done I just ordered the whole kit via St Paul Harley. I was going to get the throttle cables and get hoses made local as I have the bars. After sorting it all out it is cheaper to just get the whole kit. Now I have two sets of tall bars but that's OK.

  10. #10
    So much better!!!

    20200408_194818.jpg

    20200408_194849.jpg



Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •