Results 1 to 9 of 9

Thread: Muffler build now i could rip my hair! (if i had any)

  1. #1

    Muffler build now i could rip my hair! (if i had any)

    FINALLY! The day had come when i have all the new stuff for my bike.

    I have done the muffler on my own from a XB9 that i bought cheap.
    I have collect all the info i could (txs to this site)

    The info iŽll been told are that they are all the same, except from the valv.
    But now when i gonna put on my modified one the exhaust intake are so different in size.

    My XB12 has an inlet of 63mm and my modified XB9 is 50mm.
    Its also looks like the angle is different.

    So heres the dilemma....

    Should i modify my original muffler or try to fit the XB9......Muff01.jpg Muff02.jpg

  2. #2
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    I've heard the export bikes are different. Not sure how true that is.

  3. #3
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    OD of US spec header collector/outlet is 2.063 inches
    OD of Eurp spec header collector/outlet is 2.313 inches

  4. #4
    Both Come from "Swedish" bikes.

  5. #5
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Are you in Sweden? What are the odds?

    I’d heard also what Outlaw and loonyticfreenj said.

  6. #6
    Decided to go back to the garage and do some cutting and welding...Skarvmuff.jpg

  7. #7
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    That's the right way to do it !

  8. #8
    Tomorrow its finished Welded.jpg

  9. #9
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Atta boy!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •