Results 1 to 3 of 3

Thread: Need Help with ACM Short to Ground & ACM Stuck Open Codes.

Hybrid View

  1. #1
    Junior Member
    Join Date
    Apr 2020
    Posts
    6

    Need Help with ACM Short to Ground & ACM Stuck Open Codes.

    Hi All,

    I am new to this forum, but have done my research into other threads with this same topic.

    I have the buell tooth and connected and done my diagnostics to figure out what the codes are for and I keep getting ACM stuck open, and ACM Short to ground. I went in to change the ECM parameters on ECM Droid to uncheck the "Exhaust Valve Enabled" box as other forums have suggested, I did this and the bike still triggers the check engine light, but runs fine. I just cannot stand this light being on, what else can I do to make the CEL turn off?

    Any suggestions would be lovely.

    Thanks in advanced.

    Brandon

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,048
    Also under ECM Parameters you can just have it ignore those codes.

    Are you still running stock exhaust with the valve?

  3. #3
    Junior Member
    Join Date
    Apr 2020
    Posts
    6
    No sorry forgot to include that I bought it with an aftermarket jardine exhaust.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •