like a slide hammer?
I guys and girls.
Just signed up so this is new to me.
I seen a post on this site that a guy made a removal to so I signed up.
Now I cant find it lol. Any help
like a slide hammer?
never mind. i see what you are looking for. he said he wouldn't sell them. I don't want to steal this guys idea but I could machine this very easily for you. And yes i would sell them.
with permission from chicknstripn of course.
Thanks for the responses. As for a pristine flat head I would have to buy one mine are all well used lol
Can you believe I called the dealership and they dont list any tokls for the bike. I also need the rear axle removal tool
$460 for a new fuel pump assembly
If theres no 19mm hex in your Buell tool kit bag on the bike, they can be found on e-bay or Amazon cheaply. May I suggest leaving Amazon to the more critical deliveries for now? Ebay usually comes right from the seller and will relieve Amazon from other important duties.
Like this:
https://www.ebay.com/itm/Motorcycle-...75.c100623.m-1
Sometimes you can use the large 13/16" spark plug socket IF the 3/8" drive swedge goes all the way through it. Turned around on an extension, that is typically a 3/4" hex (same as 19mm). It fits both ends of the bike, but be aware the front is LEFT HAND thread and says so on the fork leg.
Have you tested the one you have? If it has actually tested bad, theres a long-time trick of using the same Walbro fuel pump and sock that comes on a V-6 mustang. About $35 and easily researched on here. I've done it successfully myself and it's MUCH cheaper than buying new or using someones home-brew re-build.