Results 1 to 7 of 7

Thread: Xb aftermarket levers

  1. #1
    Junior Member
    Join Date
    Mar 2015
    Posts
    19

    Xb aftermarket levers

    I have a 2009 xb12s I put pro taper handle bars on , now I'm looking for grips levers and bar end mirrors. The one I'm really having trouble with is the levers I want a set of crg but I don't no the right part # I thought the model was crg rc2 but when in RevZilla and cycle gear there website tells me that they do not fit. But I found some at a Harley dealership and they have the crg rc2 and it says they fit. So I'm wondering if anyone can help me out here?

  2. #2
    Senior Member
    Join Date
    Apr 2019
    Location
    Phoenix, AZ
    Posts
    275

  3. #3
    Is this one crap? https://www.ebay.com/itm/Long-Brake-....c100005.m1851

    I want to have long levelers but in black that not cost a fortune but still some kind of quality.
    Or could i just take apart the original and paint them?

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    I have run those chinese levers with success before. Expect the anodize to turn brown in a year and MAKE SURE THERE IS CLEARANCE BETWEEN THE M/C PISTON AND BRAKE LEVER PLUNGER WHEN AT REST!!!!

    Here are CRG's for $65:
    https://www.sportbiketrackgear.com/c...-clutch-lever/

    Otherwise, Buell offered stock black levers:
    https://st-paul-harley-davidson-buel...-xb-models-b5z
    https://st-paul-harley-davidson-buel...kit-black-l19d

  5. #5
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by Cooter View Post
    I have run those chinese levers with success before.
    You are a chinese lever.

  6. #6
    XB and 1125 are the same?

  7. #7
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    1125's have a hydraulic clutch (not a cable like XB's), but the brake lever should still swap over.

    Same rules apply to the cheap (frankly ALL) lever installation on a Buell:
    Quote Originally Posted by Cooter View Post
    MAKE SURE THERE IS CLEARANCE BETWEEN THE M/C PISTON AND BRAKE LEVER PLUNGER WHEN AT REST!!!!
    Or that cheap lever can kill you



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •