Results 1 to 5 of 5

Thread: Installed new turn signals, weird buzzing noise and donít flash when I turn them on

  1. #1
    Junior Member
    Join Date
    Apr 2020
    Posts
    24

    Installed new turn signals, weird buzzing noise and donít flash when I turn them on

    Put on new turn signals in front and rear and left the license plate light unhooked . Connected the battery back and when I tested them they wouldnít blink and made a weird buzzing sound almost like it was coming from the horn area. Any clue wtf is going on ? thanks 🙏🏼

  2. #2
    Junior Member
    Join Date
    Apr 2020
    Posts
    24
    need a ep 36 led relay from doing some searching , going to grab one now then find the stock relay and switch it out

  3. #3
    Senior Member konarider94's Avatar
    Join Date
    Sep 2009
    Posts
    4,432
    stock relay is behind the front flyscreen

  4. #4
    Senior Member Endopotential's Avatar
    Join Date
    Jan 2018
    Location
    Keeper of Nic's shiny creation
    Posts
    157
    If your new turn signals are LED, they may lead to a fast blinking condition. There are a few threads here about opening up that relay and clipping apart lead #7 on the chip. Works like a charm.

  5. #5
    Junior Member
    Join Date
    Apr 2020
    Posts
    24
    Ep36 labeled for led from advanced auto solved all the issues , 13$ and everything works perfectly



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •