Results 1 to 3 of 3

Thread: 2009 XB 12Scg, LSL steering stabilizer

  1. #1
    Junior Member
    Join Date
    May 2019
    Posts
    22

    2009 XB 12Scg, LSL steering stabilizer

    Trying to install steering stabilizer, the fork mount bracket for install is 56mm, says right on the bracket. Itís too large. From the research I have done, it shows that the outer diameter of the fork tube is 54mm, but the fork appears to taper below the lower triple clamp. I am wondering if I should order something like a 52mm universal clamp to ensure it will remain tight on the fork tube. Last thing I want is for it to come loose somehow. Thoughts?!

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,954
    https://www.buellxb.com/forum/showth...teering-damper

    Your Scg has smaller forks, I would double check exactly the outer tube size where you want to instal it with dial calipers, they are really cheap at Harbor Freight and actually work well.

    Note where I had to add a set screw to the clamp to insure it wouldn't rotate. That would be BAD.

  3. #3
    Junior Member
    Join Date
    May 2019
    Posts
    22
    Quote Originally Posted by Cooter View Post
    https://www.buellxb.com/forum/showth...teering-damper

    Your Scg has smaller forks, I would double check exactly the outer tube size where you want to instal it with dial calipers, they are really cheap at Harbor Freight and actually work well.

    Note where I had to add a set screw to the clamp to insure it wouldn't rotate. That would be BAD.
    Thanks, Cooter!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •