If you take a pic sure we could tell you what it is.
I have been trying to figure out which Buell pipe I actually have on my bike. The pipe has 2 outlets on the exhaust which would lead me to believe it is the race pipe. However it still has the exhaust actuator valve in tact (which I thought was removed for the "race" pipe) so I am uncertain which pipe it actually is? It is black, with all of the mounts for the lower fairing built right into the pipe. It doesnt appear to have been modified in any way. Again, this is for a 2009 XB12Scg. Thanks in advance!
Last edited by Ritzy; 05-25-2020 at 11:26 PM.
If you take a pic sure we could tell you what it is.
I am having trouble uploading videos/images.
I did that, selected the video, it compresses the video then when I click upload it just spins and
doesnt upload the video, it just spins like it's trying to upload in the upper right corner next to the ? mark.
Videos are MUCH easier to link. Upload to youtube and paste the link.
Photos work well linked too, but you can also just hit the button that looks like a picture, select old uploader, choose the picture, press upload. It will be inside "attach" brackets and will show up when you post.
Lets try this....https://youtu.be/iKvG0LspRYg
I know you cant see the actuator valve from this video, I would have to snap a picture while the lower is off the bike.
Last edited by Ritzy; 05-26-2020 at 12:07 AM.
Looks like a modified can. Possibly a Hawk.
Looks like a special ops muffler and they do retain the exhaust valve, if you don't like it and want to get rid of it, let me know, I'd be interested in it.
CA480F2F-6C2C-4E61-B2ED-C4F86C70AC0D.jpg This is the exhaust I picked up. Not sure how it’s going to work, but I am
Interested to see how it sounds....