That sucks, Dan Thats been going round lately. I'll go look in the parts bin for ya and see what I have.
Gotta take your licks, but see this as an opportunity for upgrades!
Knockover stuff like that and turn signals, levers, mirrors, I consider to be consumables. The nice ones are pretty, but $200 mirrors aint for me, $30 convex E-bay ones are just as shiney and maybe it's a good time for drop pegs if you've been thinking of them?
I've knocked Stella over a few times off-road, and wobbled out the hole in the primary case So I blind hole tapped the hole way bigger and heli-coiled down to 3/8"-16 (still way bigger than stock and now steel instead of just in aluminum), used a larger shoulder bolt, and put a larger oillight bushing in a billet ebay shifter to fit the shoulder. The result is a uber-beefy shifter I don't have to worry about any more. PurPony sell a ridiculously cool shifter too
NCCR has 'upgraded pucks'.
https://www.twinmotorcycles.nl/websh...&cid=290&s=&a=
I think Doug Hepler got this finished:
https://www.buellxb.com/forum/showth...ht=frame+pucks
And they're still on e-bay.
One thing to watch out for on a left side drop can also bend the shift rod, so check closely for smooth operation or a leak at that little seal.
It can also pop off the shift pawl spring. You'll know that right away because it will only up-shift and not downshift Easy fix though. I have bough a few "Nice Buell for sale, blown transmission" and made out like a bandit!
Heal up fast!