Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 38656-00ya

  1. #1
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007

    38656-00ya

    Hay Barrett,

    Was 38656-00YA ever used on a Harley or only Buell applications?

    463D64D9-E2A6-4846-B7FB-1FBD895A1D7D.jpeg

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,963
    https://sphdonline.com/products/copy...4dd8531a&_ss=r

    You don't want to pay $56 bucks for a new one in stock? Cheap-o....

  3. #3
    Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    70
    Aaron: Buell only. Sportsters and big-twins have round loop "eyelet" style lever end. Buell has round "pea" style lever end. pea style fits directly into lever assembly. eyelet style requires pin and circlip to fit the lever. i believe the tubers used the eyelet style clutch cable while the XB series switched over to the pea style clutch cable.
    system shows 38656-00YA was dropped early 2016 and now listed as 38656-00Y. doesn't say why which is typical.

    We thru now? was at the lounge having a cocktail with friends and interrupted the festivities to answer this ****.

    Last edited by Barrett; 06-28-2020 at 11:24 PM.

  4. #4
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007
    Quote Originally Posted by Cooter View Post
    https://sphdonline.com/products/copy...4dd8531a&_ss=r

    You don't want to pay $56 bucks for a new one in stock? Cheap-o....
    Nah, impatient-o.

    If it’s a regular Sportster cable, it’s likely in stock at a dealer. I’d be surprised if this part was unique to Buell, especially for its year, but so far all the number references is Buell.

    Hey, while you’re at it, will you look it up on New Castle? Also these as well.

    P0107.8C
    P0114.8B
    P0152.2A
    P0153.TA
    Last edited by 34nineteen; 06-28-2020 at 11:26 PM.

  5. #5
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007
    And another thing Super Cooter, what’s up with this?

    The R/R on my bike shows to have an original part # of 74523-91, which according to Cycle Electric crosses to their CE-206 regulator, but that supposedly has the “H” connector, which I don’t have. Mine is a either a “J” or “K” by looking at the pic, but the applications show it’s likely the “J”

    Twin motorcycles shows that a DS313035 which they have listed as fitting all of the tubers. However it appears to cross to a CE-209 which doesn’t even appear on the Cycle Electric webpage.

    St Paul lists a Y0302.F BUELL VOLTAGE REGULATOR, but it only fits 1998-2002 M2, S3, 1999-2002 X1. However googling that part number 74567-98Y which doesnt even cross to anything on the Cycle Electric page.

    I tried emailing and calling the main website number and right now I am pissed off!!!!

    I demand a correct answer! PRONTO!

  6. #6
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007
    At least someone here knows what they are talking about!

  7. #7
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007
    Ordered from St Paul HD.

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,963
    As a preventative measure? or busted parts?

  9. #9
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,007
    I noticed a little drip of oil on the bottom of the cable housing. Looking closer, the vinyl housing is cracking and falling apart, so I figured one of two courses of action.

    1. Add a bottle of trans stop leak
    2. Replace the cable.

  10. #10
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,963
    Seafoam.



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •