So I finally found the culprit to the noise coming from my front end. I was starting to drive me crazy. Ended up taking the wind screen off today when doing some other work to see if anything in there was loose.
Nothing........
So I started up the bike to check for connectors vibrating or something.
And low and behold it was the friggin horn it was not loose but there was enough vibrations after a rev up the the bracket was acting like a spring board for the horn making it smack against the bike lmao.
So I gave it a little twist and problem solved.
While I was in there I noticed what appeared to be a bolt missing but not sure is your guys the same?
allen bolt and washer missing.
48988.jpg
Ok thanks. You couldn't give me a length measurement on it could you.
Be easy on me I'm Canadian mm or inches please lol
And man yours is clean!!
#1 Buell XB bolt 5/16-18 x 7/8 socket head
LIGHTNING_XB12S_XB12S_SX__INSTRUMENT_CLUSTER_[24_45].jpg
He said in Canadian... so it's 3 stone, 2.5 touques, and a Molson golden cap. Eh.
Close cooter lmao but in my part of the country we use kieths caps