Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: front rotor mounting hardware

  1. #1
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102

    front rotor mounting hardware

    108 dollars for some bolts and washers, is this **** real?

  2. #2
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102
    Lol, almost as expensive as the front rotor.

  3. #3
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    EBR race hardware? Stock take off? Do you need a complete kit? I could probably fill your needs.

    But it's only $82 straight from EBR. Works out to about $2.25 per piece for specialty hardware is honestly not bad for 36 pieces. It's not like they are maintenance parts Have you shopped Ducati hardware??
    http://www.erikbuellracing.net/store...nting-kit.html
    Last edited by Cooter; 07-12-2020 at 05:44 PM.

  4. #4
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205
    Fill your needs hehehe

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    So juvenile!!


    LOL

  6. #6
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102
    Euro bikes and parts are cheap here in Europe.

  7. #7
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102
    I need a complete kit but the taxes over here would kill me.

  8. #8
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by DieterVonCunth View Post
    I need a complete kit but the taxes over here would kill me.
    You thought owning a motorcycle was going to be cheap? You need to reset your expectations.

  9. #9
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102
    I know it's not cheap, had lot's of euro and jap bikes but some of these Buell parts cost 4 times more than for euro bikes, been riding bikes since the 80's so i know what i'm up for.

  10. #10
    Senior Member DieterVonCunth's Avatar
    Join Date
    Jul 2020
    Location
    Tromsų, Norway 70° north
    Posts
    102
    20 bucks for the same parts if you have a BMW.



Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •