Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Throwing engine codes

  1. #1
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205

    Throwing engine codes

    intermittently I've noticed my engine light coming on when driving.today it finally said I had codes on start up. So I plugged in my diagnostic tool
    20200716_125348.jpg
    Lmao these work perfect for connecting terminal 1&2 together to get your code readout through the engine light.
    I came back with 3 codes before they repeated

    15 & 33 both of which I think must be in there from when it was apart replacing the fuel pump.
    And 15 (interactive muffler control)
    So I went fishing under the airbox cover and found it wasnt working.

  2. #2
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205
    Got it took it apart and it was just stuck lubed up the cable at the top and middle and it's working good now

  3. #3
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    The jumper method shouldn't show historical codes? Keep an eye on that.

  4. #4
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205
    So it only shows present?

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Historical codes are in the process of clearing (key cycles/miles) and won't activate the CEL, so the ECM won't display them as current codes...


    but I have been "WRONG!" before

  6. #6
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205
    So do you think I should test the temp sensor in the airbox

  7. #7
    Why? It sounds like you fixed the issue.

    You should invest in one of the Buelltooth adapters or cables and get a copy of ECMSpy/ECMDroid. They are very handy to have for troubleshooting. I grew up counting long and short flashes and its only something that appeals to communists and people who still have Commodore 64's. If either of these are you, I am sorry.


    edit: I realize you enjoy links, so here you go:

    https://www.buelltooth.com/device.html

    The part numbers for your IAT sensor is : P0138.K or 62115-99Y. If you need a new one, there is a person named Barrett who can get you what you need. He appears to be a fine person and a patriot, from what I hear.
    Last edited by casual_observer; 07-17-2020 at 09:51 PM.

  8. #8
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    603
    Quote Originally Posted by casual_observer View Post
    Why? It sounds like you fixed the issue.

    You should invest in one of the Buelltooth adapters or cables and get a copy of ECMSpy/ECMDroid. They are very handy to have for troubleshooting. I grew up counting long and short flashes and its only something that appeals to communists and people who still have Commodore 64's. If either of these are you, I am sorry.


    edit: I realize you enjoy links, so here you go:

    https://www.buelltooth.com/device.html

    The part numbers for your IAT sensor is : P0138.K or 62115-99Y. If you need a new one, there is a person named Barrett who can get you what you need. He appears to be a fine person and a patriot, from what I hear.
    Also a gentleman and a scholar from what I hear

  9. #9
    Senior Member
    Join Date
    Apr 2020
    Location
    Nova Scotia
    Posts
    205
    I'm hoping my dollar gets a little better sucks to be Canadian right now between converting paypal fee border fees and shipping. It almost $100
    {Bluetooth}

  10. #10
    There are cabled interfaces you could use to plug into a laptop via USB which should be available at Amazon.

    You seem like a smart guy, you could likely build a bluetooth receiver using an Arduino/Adafruit project board. I'm sure someone has done this before.


    I just received a PM from John Barrett and he wanted me to pass along this information. He is a true friend to Buell owners, even the Canukistanians.

    https://www.buellxb.com/forum/showth...s-ECMSpy-cable!


    Last edited by casual_observer; 07-17-2020 at 11:04 PM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •