Originally Posted by
d_adams
Yes to the red loctite. Remove the subframe spacers, you should have one set of bolts extra, put those back in. Basically, remove the spacer bolts, remove the spacers, drop the tail section back down, red loctite the 2 bolts and put it together.
"Install fastener (8) securing right front trunk pan to right side tail section. Apply Loctite 272 to threads of left rear tail sections fasteners and tighten to 102-112 in-lbs (11.5-12.7 Nm)."
This was taken direct from the service manual. It references the right side being loctited in the paragraph before this one.