Results 1 to 9 of 9

Thread: 2007 XB12Scg belt replacement

  1. #1
    Senior Member
    Join Date
    Jul 2010
    Posts
    219

    Question 2007 XB12Scg belt replacement

    Hello everyone,

    Was curious if anyone could recommend a belt I could purchase to replace my current stock belt on my 2007 XB12Scg. Starting to show some wear and tear. Thanks.

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    https://st-paul-harley-davidson-buel...most-xb-models

    But just so you know, if you are thinking that the little fibers sticking out the side are wear, they are normal and will be that way on the new belt.

  3. #3
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    847
    sir: as shaughn mentioned and great link....or you can shop around with the following info i'm providing to you. aftermarket belts tend to be up to 35% cheaper than OEM list...and belts such as the BDL carbon are outstanding.

    your OEM belt # is G0500.1AAH
    your dimensions are 1-1/8th inch pitch...14mm tooth---128 tooth count

    BDL Falcon SPC Rear Drive Belt------PART # BDL-SPC-128-118

    Dayco Panther PART # 43-9085

    Gates-Polychain DuraBelt PART # 43-9014

  4. #4
    Senior Member
    Join Date
    Jul 2010
    Posts
    219
    Thanks guys! The belt has some damage to it. Has a crack starting to form in the middle of the top side of the belt. Looks like something hit it...maybe a rock.
    Last edited by chelch; 09-08-2020 at 04:01 AM.

  5. #5
    what is the correct way to inspect a belt for replacement?

  6. #6
    Senior Member
    Join Date
    Jul 2010
    Posts
    219
    In terms of visual inspection I would look for similar wear and tear. These pictures were from the belt I just took off my bike.

    IMG_20200920_160348.jpg

    IMG_20200920_160407.jpg

  7. #7
    Senior Member
    Join Date
    May 2020
    Location
    North Texas
    Posts
    306
    Quote Originally Posted by Barrett View Post
    sir: as shaughn mentioned and great link....or you can shop around with the following info i'm providing to you. aftermarket belts tend to be up to 35% cheaper than OEM list...and belts such as the BDL carbon are outstanding.

    your OEM belt # is G0500.1AAH
    your dimensions are 1-1/8th inch pitch...14mm tooth---128 tooth count

    BDL Falcon SPC Rear Drive Belt------PART # BDL-SPC-128-118

    Dayco Panther PART # 43-9085

    Gates-Polychain DuraBelt PART # 43-9014
    This should be a sticky if it's not already.

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    It just might be in the Buell parts cross reference thread.
    https://www.buellxb.com/forum/showth...ference-thread

    Or the one on BadWeb.
    http://www.badweatherbikers.com/buel...tml?1381099169

  9. #9
    Senior Member
    Join Date
    Jul 2010
    Posts
    219
    I went with the BDL Falcon SPC Rear Drive Belt------PART # BDL-SPC-128-118 and it fit nicely. As you can see from my post in this thread...everyone inspect your belts occasionally



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •