Results 1 to 8 of 8

Thread: 1 bar risers needed-source?

  1. #1
    Junior Member
    Join Date
    Sep 2012
    Posts
    17

    1 bar risers needed-source?

    Id like to get the bars on my XB9SX up about 1. The places Ive found online dont have any. Theres a placed in the Netherlands that has them. Anybody know if a domestic/ US source? And yeah, I may just get new bars, but riders are just easier

  2. #2
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    127
    Sir: follow the instructions below. i did this mod to 2 of my ulysses's in the past and one of my SX models. cheap...works great...nice evening project...rise of close to 1"....then rotate bars and adjust perches till ergonomics suit you. see pic for final fitment.

    ORDER N0348.1ADYBP----ORIGINAL LIST $15.85
    IT IS ULYSSES TOP HANDLEBAR CLAMP. DO NOT ORDER ADDITIONAL NAMEPLATE EMBLEM.
    OR FIND GOOD USED ONE ON EBAY

    CUT AND TRIM TO FIT. finished installed product appears as in pic.
    you'll also need QTY 4 OF 5/16"x2" CAP BOLTS. source them locally or online.


    risers.jpg

  3. #3
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    349
    John that is clever my man! You come up with that one?

  4. #4
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    349
    I have a new clamp never installed I’d sell if the op is interested. It’s black

  5. #5
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,256
    This is why he is the BUELL WHISPERER.

  6. #6
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    127
    Quote Originally Posted by mike lowary View Post
    John that is clever my man! You come up with that one?
    I'm not talking to you Mike because i got PM's from both Aaron and Shaughn telling me that you hated me. so go away!
    LOL

    Mike: thanks my friend. i can only take partial credit. myself and a friend of mine on another old forum were both dicking around with this type of mod many years ago, using junk parts we had lying about. both came up with it about the same time and i saved a pic or 2. you take the top clamp...saw out the middle section...use remnants as riser on each side....massage the bottom of each so you have a nice flat surface...and source the longer bolts. hose and cable length sufficient and makes a nice 1" approx. rise on the cheap.

  7. #7
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Posts
    2,256
    Quote Originally Posted by Barrett View Post
    I'm not talking to you Mike because i got PM's from both Aaron and Shaughn telling me that you hated me. so go away!
    This is NOT true! We told Barrett that you said you were BETTER than him!

  8. #8
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    349
    Hahaha. You guys are crazy! That’s some macgyver stuff John. I like it



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •