I've had to park my bike in my covered patio for a few weeks because I'm finishing up construction on my garage. Today, as I went to fire up the machine to head to work, I got nothing when I flicked the switch to enable the ignition (a click, potentially from the relay is all I heard, but no yellow light illuminating). No fuel pump and no starter either. I checked all the fuses and everything looks fine there. I pulled all the relays and swapped them around - was able to get the yellow light from the ignition enable to light up and the fuel pump is back in action. Still, no start. Any ideas where I might go from here? The battery voltage is 12.3V.