Another one saved. Good job man
Another one saved. Good job man
As long as you don't go buy another junk bike right away.
Otherwise you're gonna come home to your family and friends waiting in your living room nervously staring at a therapist.....
Sigh.
This is all YOUR fault Cooter!
F4EBD45E-F9A2-4C34-AED4-34FA87589BE1.jpeg
34:19 is gonna be the only person in history to wear out a T27 Torx bit.
I already wore out my electric ratchet.
Its easy to come out on top when I stand on the shoulders of giants. You guys were all a big help, although one just kept drinking all my beer. I still cant figure out where that radiator cap came from, either.
Well, the one in the trailer has been broken down into parts. I probably should start a new thread for that.
Ok, getting back on track with the methbuell. I pulled the forks and upper/lower clamps and will be sending those out with the modules to get powdercoated black.
35EA223E-3366-476A-856E-76DA54F7BF32.jpeg
So, I pulled the forks apart and there was about 1/2 ounce of fork oil in one and about 10-12 in the other. Once the fork uppers come back from the powdercoaters they will be reassembled with new steels and seals.
The head bearings were a bit dry and crunchy also, so they are being replaced as well.
D8123F22-48FC-4D9B-BF7A-E39FA0B28FF1.jpeg
Remember kids, meth is bad. Don’t do meth.