Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: XB9S Clutch Cable Replacement - New cable won't thread into the primary case?

  1. #11
    Junior Member
    Join Date
    Mar 2020
    Posts
    5
    Quote Originally Posted by 34nineteen View Post
    The difference between those two part numbers is just the revision #. From what I can find on Twin motorcycles and St. Paul lookup, you do have the correct part #.

    https://st-paul-harley-davidson-buel...ing-models-u6a


    https://www.twinmotorcycles.nl/websh...sp?mc=1&aid=59


    It looks like you found the correct size/pitch for the threaded portion... I still recommend getting a bolt that size and threading it into the hole. It may just have the first thread or two buggered up from removal. Or Cooter worked on your bike. If you can thread the bolt in easily, the threaded portion should thread in easily as well.

    Lastly, download a free manual from Buellmods.com. You did remove the 3 bolt inspection cover and clutch ramp assembly beforehand, right?
    Thank you for taking the time to look all of this up! I did everything the service manual said, which is why I was so confused when the thread wouldn't fit. I saw that a lot of other people have had this same problem when using #03c and it was solved with that nut, but I will definitely be buying the bolt you recommended as well!

  2. #12
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    The bolt should be a 10 cent part from any hardware store, Home Depot, Lowe’s, etc



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •