-
Junior Member
Need parts or pictures
I’m upgrading my XB12R with the ZTL2 caliper. I purchased a new master cylinder but it didn’t come with the clamping end cap. Does anyone have a spare they are willing to part with? Or I can make one but would need pictures of It installed with brake reservoir. Thank you in advance for the help.
-
Senior Member
Its the same as the stock one. You can also order a replacement for less than $10 from Harley.
-
I have an extra one but it would be easier to get new for that price. Besides any clamp for 7/8" bars should work, just make sure the bolts are not off-set like an old Honda.
-
Junior Member
Sorry for the omission, I am replacing the XB12R master cylinder with the one from an EBR. The XB’ screws for clamp are offset and the EBR master cylinder are not and didn’t come with the clamp. I’ll try to view it off the parts manual from Buellmods
-
Junior Member
Ok, what I need are EBR part numbers:
C3602.1B9 Clamp, Master cylinder W/ mirror mount.
H0881.1B9 Bracket, Front brake remote reservoir.
-
Senior Member
Awesome, you figured it out! Looks like both parts are available for less than $40.
-
Senior Member
I used a clamp from PSR on the master cylinder and a universal billet 7/8 clamp for the reservoir.
-
Senior Member
"Universal billet"??? its like I dont even know you anymore.
-
Senior Member
It was $15!! Couldn’t say no
-
Senior Member
Sorry pal, you set the bar way too high and now this??? Its like seeing Gordon Ramsay eating at McDonalds.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules