First time uploading images here, not sure why they are rotating?
Attachment 14771Attachment 14772Attachment 14773Attachment 14774
Redone the headlight harness last night. Driving home from work yesterday and the low beam wires wire melted together and shorted blowing a fuse. The only 2 connectors I did not re-do, so of course they would fail. This bike has the headlight mod so the orange and yellow are swapped further up in the harness.
Here is the modified harness bracket at the steering head with the 1 inch pvc pipe strap that has been trimmed and heated to angle back slightly to clear the fork leg. that is an original bracket with the front middle cut out and straightened so the bundle can move left and right. There is 3 bundles under the bracket, the smaller bundle is 3 Ground Wires connected to the battery tray replacing the Ring terminals at the steering head. The big bundle is split into 2 forward of the bracket.
Wow it still looks pretty rat nesty under the fly screen, but here is a before pic after all the electrical tape is removed. I did not use any electrical tape, used black fusion tape which has no sticky glue if you need to have a redo just used an exacto knive to remove.