Results 1 to 3 of 3

Thread: Buell Blast rear master brake cylinder

  1. #1
    Junior Member
    Join Date
    Jun 2008
    Posts
    5

    Buell Blast rear master brake cylinder

    I need a new one , suggestions on what actually fits a Buell Blast??

  2. #2
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    One from eBay that the seller claims it was taken from a Blast is a good start.

    It looks like other vendors are selling rebuild kits as well.

    If you must have a genuine Buell brand new one your local Harley dealer can order one from VPI as well.

    If you wanted to get creative, you could probably make one fit from a Honda/Suzuki/Yamaha/Kawasaki/Ducati/KTM etc.

  3. #3
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    I have tried to use other calipers the rebuild kits and pads interchange but the drive belt is on the “wrong” side and the caliper is a mirror image of the Ninga,CBR, etc an XB rear would work



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •