Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 80

Thread: 2005 XB9R Custom Build

  1. #51
    Senior Member outthere's Avatar
    Join Date
    Jun 2018
    Posts
    630
    That's where I bought em'. $25 to mount. Last time I tried I ran out of patience.

  2. #52
    Hey guys I could use some help here. Who can tell me where this washer/spacer goes. I believe its somewhere near the clutch or generator assembly.IMG-0400.jpgIMG-0401.jpg

  3. #53
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    lunatic_fringe is ___________ my spirit animal
    Posts
    3,374
    According to the service manual, it looks like it goes behind the clutch. I'm curious how you got so far without the service manual?
    Last edited by 34nineteen; 05-10-2021 at 10:15 PM.

  4. #54
    Hmmmm, i'll double check in a few days but for some reason according to my memory the ID of the washer is smaller than that of the splined input shaft of the transmission that the clutch surrounds. I do have the manual but due to that memory i was looking in the wrong places. Thanks guys.

    Any of you tune your own bikes? I'm starting to look into it and id really like to be able to put a good enough tune on it to bear it in and shake it down before passing it off to a pro with a dyno.

  5. #55
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    9,271
    I din't re-read the whole thread so... unless you've added a turbo, or bigger crank/cam, Buell stock or Buell 'Race' tune will be perfectly ok.
    Last edited by Cooter; 05-13-2021 at 04:11 AM.

  6. #56
    Cooter, Ive added a few cubic inches. So I'm assuming that due to the fact that theres no MAF, its basically running a speed density tune. Which, again assuming, means that I'll be really lean unless i scale the fuel maps with the added CCs.

  7. #57
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    534
    List all the engine work

  8. #58
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    lunatic_fringe is ___________ my spirit animal
    Posts
    3,374
    You may want to reach out to the Buelltooth dude (upaero on here).

    Or contact Tim at IDS.

    I dont even think you could consider DDFI to be speed density (as I understand it) as that refers to measuring air through mass. Buelltooth has a MAP sensor mod for our bikes he sells on his site.

    *34:19 is NOT a tuning genius and only knows enough to be dangerous.

  9. #59
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    534
    It’s Alpha-N

  10. #60
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    534
    With an O2 for corrections



Page 6 of 8 FirstFirst ... 45678 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •