Results 1 to 6 of 6

Thread: Engine builder

  1. #1
    Junior Member
    Join Date
    Jan 2021
    Posts
    1

    Engine builder

    I am in Orlando, FL and have an 09 CR that Iíve had for about 3 years now. My question: Is there anyone in central Florida builds these engines? I had a seizure and the motor is locked up. Anybody around here?

  2. #2
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    2,697
    Quote Originally Posted by Apexit69 View Post
    I am in Orlando, FL and have an 09 CR that I’ve had for about 3 years now. My question: Is there anyone in central Florida builds these engines? I had a seizure and the motor is locked up. Anybody around here?
    There are no oversize parts for this motor. Its either brand new parts or someone may be able to do a resleeve. But there are no oversize pistons/rings/bearings or anything like that. I'm pretty sure most of the new parts have been discontinued through Harley, but some MAY be available through VPI (order at your Harley dealer).

  3. #3
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,673
    I would be cheaper and faster to purchase one of the complete 1125 engines that is for sale right now.

    Otherwise, any engine builder thats worth a crap can re-build the one you have, depending on why its "locked up" of course.

  4. #4
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    2,697
    Quote Originally Posted by Cooter View Post
    I would be cheaper and faster to purchase one of the complete 1125 engines that is for sale right now.

    Otherwise, any engine builder thats worth a crap can re-build the one you have, depending on why its "locked up" of course.
    Maybe this will work? Hopefully its compatible with V-Twins.


  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,673
    Be sure to get a 6-pack of this too:

    Screen Shot 2021-01-14 at 6.28.53 PM.png

  6. #6
    Junior Member
    Join Date
    Aug 2015
    Location
    Boynton Beach, FL
    Posts
    29
    You could check with Dave Weaver at Full Spectrum Racing in Orlando. Before you do anything you should determine what caused the problem (e.g., oil starvation, lean condition) so it doesn't happen again. You can look at your fuel pressure using Ecmdroid since the bike has a fuel pressure sensor.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •