ZTL2 upgrade - master cylinder with handguards

[Disturbed1]

Or you could just purchase a new Nissin Radial Master Cylinder Kit, as that is what the EBR uses... ie parts bin stuff... There are slight color variations sometimes between the EBR and Nissin. (EBR had a spec'd production run of dirty bronze rather than Gold or Black) Just Google the Part Numbers or a Local Motorcycle Shop can get you the items through a Shindy Distributor. Also, you will need to extend your existing brake light wires by about three inches to connect to the new switch.

https://www.amazon.com/Shindy-17-656...0013LEZQ0?th=1

And for those in the Netherlands...

https://www.amazon.nl/Shindy-17-656B...3038239&sr=8-1

Cooter, The second item you link to is a "Hydraulic Clutch" which bolts to the Left Handle Bar Perch. I did not think Clutch and Brake side were interchangeable... But maybe you are more special like 34ninteen...

Attached is a catalog picture of all the 19mm Nissin Part Numbers, including rebuild kits, additional parts, and single banjo bolts.

Shindy Nissin.jpg

Radial Master Cylinder.jpg