Or you could just purchase a new Nissin Radial Master Cylinder Kit, as that is what the EBR uses... ie parts bin stuff... There are slight color variations sometimes between the EBR and Nissin. (EBR had a spec'd production run of dirty bronze rather than Gold or Black) Just Google the Part Numbers or a Local Motorcycle Shop can get you the items through a Shindy Distributor. Also, you will need to extend your existing brake light wires by about three inches to connect to the new switch.
https://www.amazon.com/Shindy-17-656...0013LEZQ0?th=1
And for those in the Netherlands...
https://www.amazon.nl/Shindy-17-656B...3038239&sr=8-1
Cooter, The second item you link to is a "Hydraulic Clutch" which bolts to the Left Handle Bar Perch. I did not think Clutch and Brake side were interchangeable... But maybe you are more special like 34ninteen...
Attached is a catalog picture of all the 19mm Nissin Part Numbers, including rebuild kits, additional parts, and single banjo bolts.
Shindy Nissin.jpg
Radial Master Cylinder.jpg
Last edited by Disturbed1; 02-11-2021 at 02:32 PM.
This is on our bike and works fantastic.
https://www.motodracing.com/accossat...voir-lever-rst
Sorry I didn't google search for you accurately enough, my apologies, I'll do better next time.
I would think SPHD ships parts to customers everywhere but asking them (instead of me), would get you better info. Obviously.
Now that I know you are posting from the Netherlands, you could just buy from the biggest Buell parts places on the planet earth that happens to be IN the Netherlands.
Here, I Google searched it for you, but you should probably check all the info before ordering:
https://www.twinmotorcycles.nl/websh...F-1A824999327C