Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: foot control relocation kit?

  1. #1
    Member evilokc's Avatar
    Join Date
    Nov 2020
    Location
    oklahoma
    Posts
    69

    foot control relocation kit?

    i feel like ive seen a kit that moves the rear sets forward a down a few inches but i cant find it. im still searching. if anyone knows where i can fins what im looking for please advise. thanks.

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Drop pegs in either 1" or 2" swap right on (AVOID the cheap "adjustable pegs"!) Buell makes them OE and adjust the controls according to whatever you like.

    Alternatively I have used these with success:
    https://www.ebay.com/itm/Adjustable-...cAAOSwEdteOj8c

    I have no idea what the range of adjustment is compared to stock on those Chinese controls but they bolted on fine. Expect the anodize to fade quickly.

  3. #3
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    try amazon or e-bay adjustable rear sets I recently bought but havent tried yet on a Blast project https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 they look nics and I'm going to ues an XB primary cover

  4. #4
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    well we were both Typing at the same time I'm going to try the cheap ones and I will post the results . they look like the same ones and are cheaper if there is not too much shipping

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Those are probably identical, but it will be interesting to use them on a Blast. The rear sets don't connect to the primary on either bike.

  6. #6
    Member evilokc's Avatar
    Join Date
    Nov 2020
    Location
    oklahoma
    Posts
    69
    i found some that look VERY nice by knight design. drop 1 or 2 inches. look like good quality.knight design 2in extended.jpg

  7. #7
    Member evilokc's Avatar
    Join Date
    Nov 2020
    Location
    oklahoma
    Posts
    69
    wow thats a full adjustable set. i was just expecting pegs. so there are o.e adjustable sets? are they impossible to find now?
    Last edited by evilokc; 03-11-2021 at 12:38 PM.

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    No OE adjustable rear sets. Just OE pegs, OE 1" drop pegs, or OE Ulysees pegs are about 2" drop and will fit an XB.

    Adjustable rear sets are not OE.

  9. #9
    Member evilokc's Avatar
    Join Date
    Nov 2020
    Location
    oklahoma
    Posts
    69
    once you get these on please give us a review.

  10. #10
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Knight design stuff is very high quality. I had a set of those pegs on a bike I used to own. Should have pulled them off when I sold the bike!

    Look for a user called oh9bolt. He has a set of aftermarket rear sets on his Firebolt.



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •