Results 1 to 4 of 4

Thread: X12 ss shock and uly shock WANTED

  1. #1
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    114

    X12 ss shock and uly shock WANTED

    looking for hydraulic tensioner from a uly shock and a 2006 SS shock to make a hybrid of the two to lower the rear of my XT and maintain the tensioner, I'm also wanting the spring rates and free standing height to have the new spring made if any one has the specs.
    Last edited by cvc; 03-03-2021 at 05:47 PM. Reason: spell check

  2. #2
    Senior Member BuellyBagger's Avatar
    Join Date
    Apr 2010
    Location
    Nebraska City, NE
    Posts
    3,606
    Im not so sure the ss shock will be much lower (if at all) than the xt shock, which is already shorter than a X. ? Maybe you've already got this figured, either way id be curious to know for sure

  3. #3
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    114
    Others have successfully lowered their XTís by one inch using the early SS rear shock and spring at the expense of the hydraulic tensioner. The extended length is shorter but I donít know what effect the tensioner will have on the installed hight of the spring.
    You know I want my cake and eat it too.

  4. #4
    Member
    Join Date
    Apr 2020
    Location
    Mendocino, CA.
    Posts
    57
    Not sure if this will help you or not, but I have a brand new "Hyperpro" progressive rear lowering(1") spring made for an XB12X Uly. It is 8-13/16"(224mm)free standing, and is in the factory purple. Not sure about the spring rate. This one they sent me had a few chips in the coating after shipping, and they sent me a new one.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •