Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Has anyone retro-fitted EBR hand controls (left/right switches, ignition, etc) on XB?

  1. #11
    Senior Member outthere's Avatar
    Join Date
    Jun 2018
    Posts
    657
    All you have to do when the throttle doesn't return is hit the kill switch

  2. #12
    Senior Member AC_Schnitzel's Avatar
    Join Date
    Jul 2018
    Location
    Bay Area, CA
    Posts
    132
    Quote Originally Posted by Cooter View Post
    He's saying the left controls are plug n'play, the EBR right controls work too but you'll need the EBR throttle housing as well because its a separate piece on an EBR vs. one unit (switches and throttle) on an XB.
    And you may need to use your stock XB throttle cables in that EBR housing depending on your bars. Mike had an issue and only uses one cable (no pull cable) maybe he can clarify why? I forgot, lol.
    ah got it -- i think you're referring to this: https://www.ebay.com/itm/EBR-Erik-Bu...A/202108283774

    I wonder if the 1190SX cables will work since the bar set up is more similar to Lightnings.


    edit: nvm, looks like it's the same PN for both RX and SX: https://www.ebay.com/itm/EBR-Buell-1...R/202107516393
    Last edited by AC_Schnitzel; 03-20-2021 at 01:25 AM.

  3. #13
    Senior Member AC_Schnitzel's Avatar
    Join Date
    Jul 2018
    Location
    Bay Area, CA
    Posts
    132
    Quote Originally Posted by mike lowary View Post
    I had to remove quite a bit of material from the stock cable to work in the EBR throttle housing. I also machined a block off plate to run just the one cable.
    gotcha, what did you have to remove -- some of the throttle cable jacket?

  4. #14
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    603
    Quote Originally Posted by AC_Schnitzel View Post
    gotcha, what did you have to remove -- some of the throttle cable jacket?
    Had to remove material from the bend part.

  5. #15
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    603
    Quote Originally Posted by outthere View Post
    All you have to do when the throttle doesn't return is hit the kill switch
    If i only had a kill switch...

  6. #16
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    603
    I got 2 blinkers and a starter

  7. #17
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by mike lowary View Post
    Had to remove material from the bend part.
    Ah gotcha!

  8. #18
    Senior Member
    Join Date
    Jun 2015
    Location
    Cincinnati
    Posts
    603
    The Buell cables will not work and look correctly in the ebr housing without significant modifications

  9. #19
    100% plug and play EBR controls and Motion Pro Rev2 For an EBR on a Firebolt.




    Last edited by oh9bolt; 03-20-2021 at 08:15 PM.

  10. #20
    If you go with the Rev2 you can get custom length cables made for your Lightning, you just have to send them your stock cables I believe.



Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •