Results 1 to 2 of 2

Thread: How to get access to rear blinkers?

  1. #1
    Member ksquare's Avatar
    Join Date
    Aug 2018
    Location
    Scottsdale, AZ
    Posts
    31

    How to get access to rear blinkers?

    I need to fix the mounting for my turn signals but I'll be darned if I can figure out how to access the area. The "trunk" liner doesn't seem to want to come out. Do I have to remove the whole tail section? I have Lightech FRE925NER sequential signals which look really cool but are kind of iffy on mounting.
    signal_s.jpg

  2. #2
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    lunatic_fringe is ___________ my spirit animal
    Posts
    3,374
    Quote Originally Posted by ksquare View Post
    I need to fix the mounting for my turn signals but I'll be darned if I can figure out how to access the area. The "trunk" liner doesn't seem to want to come out. Do I have to remove the whole tail section? I have Lightech FRE925NER sequential signals which look really cool but are kind of iffy on mounting.
    signal_s.jpg
    IIRC the rear plastic fairing will come off after removing the seats and 4 other T27 bolts. Iíve only had 1125ís which have slightly different subframes than a Firebolt, but the same plastic fairing.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •