The hoses in the airbox are breathers that go to each valve cover, and the single open hose is the breather from the crankcase. All factory and where they are supposed to be
I installed the missing exhaust bushing I described in a different post (https://www.buellxb.com/forum/showth...-bolt-question). Yes I loosened all exhaust fasteners and tightened everything up together. Thanks all for your help!
I decided to examine the air filter and area under the seat. What's the deal with the two hoses in the filter area? That original?
intake.jpg
Also, what is that hose (open on the end) that is zip tied to the shock?
hose.jpg
I'm liking this bike. I think my others are getting jealous...
The hoses in the airbox are breathers that go to each valve cover, and the single open hose is the breather from the crankcase. All factory and where they are supposed to be
twins protruding thru airbox baseplate stock location.
single tie-wrapped to rear monoshock stock location.
refer to attached schematic.
the length and type of hose NOT factory issued. replaced by former PO.
xb-breather.png
Thanks guys. It looked a little curious to me. Another question, is the seat supposed to be held down by something more than the two bolts at the rear?
seat.jpg
On the far right of the pic you can see where the "hook" of the seat attaches.
Last edited by 34nineteen; 05-03-2021 at 04:11 PM.
This guy is just mad because he cant just pour oil in through the valve cover.
1936_l.jpg
I have a box full of those, and 2 cars that use them. Dang I'm old...
Well now, your frame picture makes it clear. The problem is, the little piece is missing on mine. That's a puzzle. I guess I could fabricate a replacement and weld it on.
hose.jpg