Looking for X1 dash

[fredmalito4]

I need a replacement X1 Dash/instrument panel, with no other parts, just the plastic, condition unimportant. Thank you!

[34nineteen]

Order one from your Harley dealer.

[fredmalito4]

Uh, sure. Parts availability is slim for a 21 year old bike whose brand was discontinued 12 years ago. The local dealers don’t even have any reference manuals anymore. I would know this because I bought them.

Those who do have it want nearly $300 for a piece of plastic. I’ll pass! 🤣 That’s why I despise stealerships.

So, anybody got a used one hanging around? Even a crappy one is fine, as long as it’s structurally sound.

[Cooter]

Or you could:

Order one from your Harley dealer.

https://st-paul-harley-davidson-buel...4ae80e01&_ss=r

$99 and in stock.

[fredmalito4]

Well, at least that one isn’t $300! However, I am looking for a used piece that is suitable for modifying that I won’t feel guilty about, as parts for these are dwindling.

[Cooter]

Sheesh!

$49 for a carbon fiber cover you can hack up, guilt free, to your hearts content:
https://www.ebay.com/itm/38380680636...evt=1&mkcid=28

or if that is still too rich for your art project, your highness...

https://www.amazon.com/Install-Bay-8...s%2C123&sr=8-5

plus:

https://www.amazon.com/Amazon-Basics...s%2C112&sr=8-6

Merry Christmas.

[fredmalito4]

Allow me to reiterate;

I am looking for a stock dash panel suitable for modifying. My dash panel is in perfect shape and had been removed. I want one I can slice and dice to provide a structural support for the poorly made, flimsy, but attractive aftermarket carbon fiber dash that is too thin a material to support the weight of the instruments, and allows the gauges to twist and turn while riding. I don’t want one in great shape that someone who needs one could use on a restoration. I don’t wish to waste good parts.

[34nineteen]

Allow me to reiterate;

I am looking for a stock dash panel suitable for modifying. My dash panel is in perfect shape and had been removed. I want one I can slice and dice to provide a structural support for the poorly made, flimsy, but attractive aftermarket carbon fiber dash that is too thin a material to support the weight of the instruments, and allows the gauges to twist and turn while riding. I don’t want one in great shape that someone who needs one could use on a restoration. I don’t wish to waste good parts.

Here is a used one.

https://www.ebay.com/itm/Buell-X1-Li...-127635-2958-0

I think I may have a new one in a box in my garage somewhere. I was going to toss it with some other parts no one wants.

[fredmalito4]

If you don’t mind taking a look for it, let me know a price and what else you have.

Cooter led me the a new one for $100. I’m hoping to not spend that much, but would prefer to give it to a person than a company if possible.

[34nineteen]

If you don’t mind taking a look for it, let me know a price and what else you have.

Cooter led me the a new one for $100. I’m hoping to not spend that much, but would prefer to give it to a person than a company if possible.

I also led you to a new one for the same price you can order from your Harley dealer.