-
Junior Member
Buelltooth Error
What's up y'all,
First time posting here so forgive my ignorance. I've tried looking up this issue but can't seem to find a resolution or even an explanation so I thought I'd borrow some wisdom from y'all.
In short my 09 XB12SCG is giving me ignition/idle problems. I was able to snag a Buelltooth Dongle awhile back and just picked up a cheap android tablet (I'm an Apple guy so this might be part of the issue.) Here's where I'm at:
- Connect dongle to diagnostic port (pretty sure it's the right one)
- Ignition on
- Run switch on
- (Buelltooth flashes red repeatedly)
- Open ECMdroid, Protocol set to Stock/P&A
- Hit the red connect button
- Select Buelltooth in Paired Devices menu
This is what happens in the "Read EEPROM" box. Connecting to BUELLtooth --> Reading ECM Identification --> Timeout reading 0 from 6 bytes.
I've tried uninstalling the app. Reconnecting the dongle. Reinstalling. Repairing. And nothing. Same issue every time.
Anyone run into this before? Help!
-
Senior Member
-
Junior Member
Well...I never even considered that could be the issue.
Will do! Thanks!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules