TPS Sensor P0279.3AA

[lew360]

Go for it. Info is info. I'm 99% sure its a Badweb link anyway lol.

It is.

http://www.badweatherbikers.com/buel...tml?1634776365

[34nineteen]

Did you buy Tootals throttle shaft? I'm often hesitant to jump on some of those conversations as most are from 10+ years ago and the person providing the parts or service has long since moved on. It looks like your posts are from 2021 though.

Twin motorcycles also sells a backdated shaft also to revert the 07 throttle body to the early style.

As I remember it, the 07 TPS was quite a bit more expensive than the early version, but that may have only been when the TPS was becoming discontinued. I wouldnt have paid attention if it was a "normal price". However, an eBay search of past transactions for the sensor shows them selling for well over $100.

[lew360]

I did get the shaft from Tootal. You can use a TPS from a '93 Mustang GT it is the same as the Buell early TPS. I got an early TPS from St. Paul but the Mustang works. I also changed my intake gaskets to the James blue while I was at it.

I found the Twin motorcycle after but his was quite a bit cheaper but built the same it is a quality piece.

[Cooter]

IIRC he's still REALLY mad they made (copied) that piece.

[pdksh]

I did get the shaft from Tootal. You can use a TPS from a '93 Mustang GT it is the same as the Buell early TPS. I got an early TPS from St. Paul but the Mustang works. I also changed my intake gaskets to the James blue while I was at it.

I found the Twin motorcycle after but his was quite a bit cheaper but built the same it is a quality piece.

How did you contact tootal? Bad weather? How long ago did you order the shaft?

My buddies S3 throttle shaft splintered and a screw made it into the intake… I think I’m going to replace the shaft on my 07 for piece of mind

[lew360]

I got it back in July. I PM'ed him on Bad Web. His email is gscam@att.net if that helps.

http://www.badweatherbikers.com/buel...38/649487.html
That is the link he sent on rebuilding it.

[pdksh]

Thank You

[lew360]

Thank You

No problem. Just hope it all helps you out.