Hello,
Good day. I have an 06 Xb12 Ulysses.
Today I noticed that the RPM does not read. When I switch key position to on. I get the early sweep. Both RPM and Speedo sweeps to the right. However after starting the bike. The RPM does not read. It stays at zero. What could be wrong.
Thank You
Thank you very much. I noticed if I turn the handle to the left... The gauge works again. Could it be a loose wire at the handle bar?
While you're rummaging around under the nose fairing, disconnect the ground leads from the steering neck (Ground #4) and inspect them for corrosion, breaks or other damage. That's a common trouble spot - not necessarily your issue, but a good check regardless.
I have cleaned out the grounds at the steering neck but still not working perfectly. I will have to read through the manuals