Results 1 to 4 of 4

Thread: WTB M2 Cyclone Parts

  1. #1
    Junior Member
    Join Date
    May 2022
    Posts
    6

    WTB M2 Cyclone Parts

    My son had a little high side on his 1998 M2, which damaged the following that we're looking for:

    Handlebars
    Both sets of controls on handlebars - turn signal, start, etc
    shift lever, possibly just the toe part
    Windscreen - red preferably
    clutch lever

    Also looking for a clutch cable, as the shielding is coming apart.

    He doesn't have a whole lot of money, I may be able to help him some. Please let me know what you have, or maybe give me some ideas!

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    9,986
    Depends where you are in the world, Carmen.

    Buellparts, SPHDOnline, NCCR, Twin Motorcycles, even e-Bay.

  3. #3
    Junior Member
    Join Date
    May 2022
    Posts
    6
    Sunny Sarasota, FL.. Tried the Ebay route to no avail. Did find some parts through St. Paul HD, also found he broke the mirror, but likely can find some aftermarkets to replace them. Unaware of NCCR, will have to check them out. Have a few I am eyeballing at BuellsterParts as well. Thank you for the input!

  4. #4
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    497
    Sir: All stock 1998 M2's have 7/8" bars as factory delivered. Measure the approx HEIGHT....WIDTH....PULLBACK....and purchase cheap generic set.

    XL same vintage L&R switch gear would interchange except XL switch gear sized for 1" XL bars. Can be adapted on the cheap with a bit of fitment creativity.

    OEM CLUTCH CABLE part # TM-38656-00YA..........list is $63.64....plenty still left in dealer system...readily available.

    You're welcome.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •