Results 1 to 8 of 8

Thread: Need a clutch cable

  1. #1
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376

    Need a clutch cable

    Anyone have a good or new clutch cable for XB , X,XT,SS,STT lightning. I broke the primary where the clutch release is and when I went to install the new one the clutch cable end that goes in the primary snapped off the threads flush in the covers

  2. #2
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    843
    # 38726-09
    Correct cable for all "long framed" XB models
    Still in excess of 25 in dealer system. Reasonably priced.

  3. #3
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    Thanks I was looking for a part number and can only find my service manual at the house, I must’ve taken it to the shop. Any idea if I could use a sportster cable so I can get it in town today?

  4. #4
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    843
    NO.
    XL-XR clutch cable has round eyelet style lever end. All XB's have round barrel style lever end w/bushing covering same.

    W
    hen searching for this cable via dealerships, below part numbers will work and still active in system. Difference in part numbers related to minor length change....O-ring....primary cover threaded post length. Make sense?

    38726-06 38726-06A 38726-06B
    Last edited by Barrett; 06-30-2022 at 12:46 PM.

  5. #5
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    yes clear as mud , and I don't have any sporty ramps but I do have a Blast one I have used sporty clutch cables on them,

  6. #6
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    st paul had it in stock is being second day delivered shipped on Tuesday Thanks again, and Iwill try and put the Blast/Sportster ones side by with the XB if I get time and see if is interchangeable. If so then clutch cables would be nearly in inexhaustible supply .

  7. #7
    Senior Member
    Join Date
    May 2010
    Location
    GOODLETTSVILLE,TN
    Posts
    895
    What were the results?

  8. #8
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    I forgot to check while I had it apart I will pull the clutch cover and look at it this weekend.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •