Finally got the frame back over the motor and I have a few questions because I didn't take enough pictures.
1. The belt is very close to the oil line, might be even rubbing. The swing arm looks fine, no accidents. Is it possible the oil lines were tighten and shifted? I didn't put on any guards. I'm going to be removing the oil lines to add the thread sealant so any clues as to why the oil lines are so close to the belt? The clip that holds the two lines together doesn't screw to the engine? Should it?

2. Does the starter wire loop over or under the motor mount that looks like a dog bone.

3. I didn't label a few parts. Anyone have a picture of what the fuel line nut at the fuel pump looks like? Is it the one with nylon on one side?

20221112_182103.jpg20221112_182039.jpg20221112_182103.jpg20221112_182039.jpg