Results 1 to 9 of 9

Thread: Can anybody tell me what this harness is?

  1. #1

    Can anybody tell me what this harness is?

    Bought a used 2009 xb12xt . Been chasing problems after problems. While switching out spark plugs and wire. I noticed this harness that was not connected to anything. Can anybody identify what it is and if I need it plugged to something. The harness I’m talking about is the one I’m holding with my fingers. It’s also wrapped to the same wire as the ignition coil harness in yellow
    D8DD4D6D-8CE1-44AD-9993-37AF74BED2BB.jpg

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    It's fine.

  3. #3

  4. #4
    What’s it for?

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    They are used to connect or disconnect electronic components to a wiring system without the need to solder each joint every time.

  6. #6
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    847
    All XB's share the same main wiring harnesses with their Euro and Asian spec counterparts. The harness connector you're holding is capped for US spec bikes. It operates a sensor only used on Euro-Asian spec bikes. The yellow connector is the ignition coil feed wire.

  7. #7
    Perfectly explanation

  8. #8
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    and with that said, school is out.

    Principal Barrett Strickland will be keeping an eye on you slackers.



  9. #9
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    As he should, especially two individuals that I know of !



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •