-
Senior Member
It's is definitely the ground. That is the same issue I was having before I made my own headlight harness. But mine was on the high beam side. To rule out the main harness, unplug the headlight harness. Use small needles or t pins and check voltage at the connector. My failure point was the headlight harness grounds.
-
Junior Member
Hi all, thank you for you input. Turns out I had a wire that quit in the headlight harness. Bypassed and isolated it and now all good.
Cheers.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules