Results 1 to 4 of 4

Thread: Do i have use for this Ignition coil and Ecm on my bike?

  1. #1

    Do i have use for this Ignition coil and Ecm on my bike?

    I got an opportunity to buy a Ignition coil, ecm and all the wires from a scrapped XB9R -03.
    I have a XB12ss -08
    Nothing is wrong but maby i need them later

  2. #2
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    The ECM is different and will not work at all. The coil and wires should transfer over, but why would you reuse a set of ignition wires?

    So, you have an extra coil. Hopefully you tested it to make sure its still in spec.

    PRO TIP: If it tests OK, be sure to put a large "X" on it so you don't mix it up with a suspected bad coil.

  3. #3
    I just thought it be good to have, just in case 😊

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    And don't turn the ignition on when testing that coil with the X on it. That same idiot shocked the Hell out of himself!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •