Race Buell Improvement Thread

[Cooter]

those bikes would require diving back into the motor to redo for that fuel, not sure how much pep they'd loose in the process?

Quite a bit, they require the 110 because of both super aggressive timing curve and a massive amount of compression. You'd at least be in it a set of pistons and timing re-map to survive with the 97. Hard to say what the HP penalty would be.

or stick with what's known?

Buellers like these a lothttps://www.amazon.com/KUQIQI-headlight-Motorcycle-Projector-Headlights/dp/B083PZ5GFN/ref=asc_df_B083PZ5GFN/?tag=hyprod-20&linkCode=df0&hvadid=693627432361&hvpos=&hvnetw= g&hvrand=12632587772302209229&hvpone=&hvptwo=&hvqm t=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031012&hv targid=pla-907155609313&psc=1&mcid=94bc50b10dfc309792e7d6372c 9fbb5d
and it seems these are identical for cheap enough its worth a shot:
https://www.aliexpress.us/item/32568...yAdapt=glo2usa

I have a set of Delphi Weatherpack style connectors I was contemplating using, I don't think i have the right crimper for the OEM style it shipped with?

I don't think the biggest weatherpak will support that amp load? The ones in my kit won't But lots of options for high amp specific connectors.

[34nineteen]

I have a set of Delphi Weatherpack style connectors I was contemplating using, I don't think i have the right crimper for the OEM style it shipped with?

Let me know. I think everything is here aside from ACC plug and the horn connectors

IMG_5414.jpg

[Kurlon]

6000k color temp is a bit blue for my tastes, that high beam also seems pretty hyper focused to one spot? I think I’ll just put some good H7 bulbs in the stocker and remind myself that the goal is to make it inspectable / safe first, nice later if I am going to hang onto it.

[34nineteen]

6000k color temp is a bit blue for my tastes, that high beam also seems pretty hyper focused to one spot? I think I’ll just put some good H7 bulbs in the stocker and remind myself that the goal is to make it inspectable / safe first, nice later if I am going to hang onto it.

I have the Amazon version. It’s not perfect but better than the original setup.

[Kurlon]

Anyone figured out a replacement for Buell heated grips yet?

[Barrett]

Anyone figured out a replacement for Buell heated grips yet?

Oxford....touring version.

[Kurlon]

I can't find any full wiring diagrams for them, are they dual element like the Buell OEM heated grips, aka suitable for running off the OEM switch and harness?

[34nineteen]

Let me translate this for you.....

[34nineteen]

Attachment 17474


Where did ya get the sliders? Since CoOter has been CoOter-splaining a lot of track riding education to me, and its starting to stick, I may need them. I still haven't mastered the whole highside/low side thing like he has.

IMG_5323.jpg

[Kurlon]

Sliders are T-Rex kit, seems pretty solidly designed.