New to me Ulysses

[34nineteen]

So, I was degreasing my wheels, as the duct tape covering the wheel weights (mandatory for track use) will never stick with that much grime. They're a bit lighter than I remember and already have a set of Pirelli Rosso 3 tires mounted up. They look at bit different too. Instead of the Enkei logo, I see the CastAlloy logo. Then I see it.

RACE USE ONLY.

Oh mama!!!!

[Kurlon]

NOT FAIR!

...still trying to find a serviceable set...

[34nineteen]

It's coming together.

IMG_4172.jpg

IMG_4171.jpg

I still have a ways to go...

I need to find a GSXR or other 19mm master cylinder to work with the ZTL2 and custom hose.

I am waiting for my Lightning/Firebolt shock to arrive to see if it will lower the rear of the bike a little.

Once that is sorted, I will lower the front to a little bit lower than the rear. Right now the travel is at 4.9 F+R. Stock R/S is 4.7. I'm thinking 4.5F + 4.7R. I know wheel travel isn't the best way to do this, but its the only metric I have to work with at this time... and I'm just spitballing it.

I have a new brake hose for the rear on the way (stock Ss).

Once I get the shock mounted, I need to mount the reservoir.

I need to mount the rear master reservoir. Or do the racer-boi clear hose trick.

I need to figure out a rear battery setup. I will need to go lithium as I need some more room under the seat to mount the ECM properly.

The front fairing and containment pan should arrive in mid-late March.


Then I am heading to Maine, to race Kurlon and crash into each other on our first lap. Unless Bubbles runs me over on her Ninja 400 first!

[Kurlon]

I'll have my protest forms pre-filled out and ready.

And a case of Moxie, and there had better be a trip out to dinner that evening.

[34nineteen]

I'll have my protest forms pre-filled out and ready.

And a case of Moxie, and there had better be a trip out to dinner that evening.

Hell yeah!

BTW, the shock showed up this weekend.