Results 1 to 3 of 3

Thread: Crossroads Bars Triple Tree Bolts

  1. #1
    Junior Member
    Join Date
    Jun 2015
    Posts
    11

    Question Crossroads Bars Triple Tree Bolts

    I have Crossroads installed on my 09 XB9 and need to get replacements because I rounded out the allens. Does anyone have any available or know the correct size to replace them?

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,896
    The stock allens work so HD will have some. If you want them cheaper and don't feel confident to ID them yourself, take one to a Hardware store (NOT Home Depot) and have them see. They should have a bolt guide there to do it your self too.

    They are allen bolts, but don't get the usual "black oxide" as they will rust immediately outside. Get zinc plated or stainless and use a tiny bit of anti-seize. The load on them is negligible.

    Do NOT over-torque them! It's less than you think. Spec in the manual.

  3. #3
    Senior Member Barrett's Avatar
    Join Date
    Jun 2020
    Location
    AmishLand, PA
    Posts
    848
    Quote Originally Posted by BuellMeIn View Post
    I have Crossroads installed on my 09 XB9 and need to get replacements because I rounded out the allens. Does anyone have any available or know the correct size to replace them?

    The 4 stock handlebar clamp bolts are 5/16th-18 and 1" in length. They are Allen head and readily available anywhere.

    You're welcome



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •