Airbox intake removal?

[jdaniels]

Helloooo..

I´m gonna do some painting so how do i remove the intake and the get it back? Heatgun and then glue?Intake.jpg

I will show you the result later on

[Cooter]

The black part the surrounds the gas filler?

Masking tape

[jdaniels]

Ok, but i thought it would be nicer to have som paint in that hole.
Not so fun if you can see som yellow there.

[Cooter]

There should be a (black) inner airbox cover directly under it. But even if that has been deleted, I doubt you can see color through that grill.

If you insist on removing it, sure, break it off and then hot glue, maybe JB weld would hold it back together on those tabs?

[motoguy]

I cut the tabs off, vinyl wrapped, and put the black mesh piece back on with 3M VHB tape.

[jdaniels]

Just a little pull and it were off
Gonna hot glue it back.

[jdaniels]

4.jpg

Found some more plastic, whitch is really hard and expensive here in Sweden.
Now away to the painter

[Cooter]

The folks at NCCR couldn't help?

[jdaniels]

Probably but they arent cheap