Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: 03 low idle rough running

  1. #11
    Senior Member
    Join Date
    Jan 2009
    Posts
    1,321
    Try resetting your TPS again, but before you do it, turn the idle screw out WAY farther than 0.0. When you hit 0.0, turn it some more, then some more. Then make sure your throttle is forward completely, then reset the TPS. Now start screwing the idle screw back in (might take awhile) until you get to 4.6-5.0. Fire it up and adjust the idle.

    I had a similar issue but this took care of it. Good luck.:)

  2. #12
    Junior Member
    Join Date
    Feb 2009
    Posts
    10
    thanks 03firebolt9r i tried that but as soon as i try to move the idle up the bike stalls out. I am wondering if my timing is off. its better at speed but every once and a while it will start bucking and surging.

  3. #13
    Senior Member konarider94's Avatar
    Join Date
    Sep 2009
    Posts
    4,435
    wow i cant believe they wouldnt split a pack of 4. im guessing there is a very large percentage of cars on the road that are 6 cylinders.



Page 2 of 2 FirstFirst 12

Similar Threads

  1. Back firing, running rough, high idle
    By Duke47 in forum Troubleshooting
    Replies: 13
    Last Post: 06-20-2015, 04:54 AM
  2. Very rough running, especially idle
    By starcraper in forum Buell 1125R
    Replies: 3
    Last Post: 06-15-2015, 04:44 PM
  3. Rough idle and poor running
    By Firebolt52 in forum Troubleshooting
    Replies: 12
    Last Post: 06-12-2015, 07:29 PM
  4. XB12R running rough and stalls at idle
    By Dogge in forum Troubleshooting
    Replies: 12
    Last Post: 07-01-2014, 04:12 PM
  5. Rough Idle/Rough Running, Time to take in?
    By tbanas2 in forum Troubleshooting
    Replies: 6
    Last Post: 05-26-2011, 10:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •