I used these cheap mirrors https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
They worked OK and I do not care bashing and scrathcing them around. One mirror had loosen screws so I had to remove the mirror glass, tighten the screws and glue the mirror back. The bar inserts were a little loose for Buell handle bar, so I wrapped the insets with plastic stripes I cut from plastic bottle to increase the inserts diameter.
Now I decided to install foldable mirrors because of extra room they allow to save. Ordered this one https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 and this one https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I will probably 3D print protective rims for those expensive foldable mirrors, I do not want to scratch them.
Hi Folks,
Not cheap but loads of models, super high quality and... unbreakable because without glass !
https://motogadget.com/shop/en/spiegel.html
They don't seem to make a fold away set up for lane splitting but still very nice.
You could rotate the oblong ones 180*? I do that with my cheap e-bay ones to split lanes in slow traffic.
I don't usually go for baller trinkets like that, but dang those are sick.