Get an Scg rear Spring and shock setup and slip the front forks.I did this with my Firebolt and it sits as low as my GF's Lightning Scg.
Before
After
And Now with Ss swing arm and Scg tail
I am looking for info how we can lower my bike.. to as low as we can!!! can any one help us.
Get an Scg rear Spring and shock setup and slip the front forks.I did this with my Firebolt and it sits as low as my GF's Lightning Scg.
Before
After
And Now with Ss swing arm and Scg tail
there are a whole bunch of ways you can lower it. but what are you looking for lower seating position or just a scape the can poor handling look? lower seating position on a "s" model is easy get a lower set and adjust the spring rate. that's a cheap fix. or next get a scg front end and rear spring will cost more but your bike will still handle well or and really don't recommend it is pull your front end and take it to a machine and have them cut another grove for the safety snap ring how ever low you want to make the bike. and get or cut rear spring put in doing that to your bike you will have to tightin your spring rate and damping all the up which will make your bike ride like a car with hydros and basically like ****. other thing you need to think about is whats going to hit front fender on motor mount muffler on the ground and so on.
Squid, I was expecting something like....take off the wheels, lol
As Squid mentioned - scg parts is the way to go. However if you have a 06+ you'll need the triple tree from the scg (or early r,s,ss) as well since the front forks are 41mm. Don't forget about doing the kickstand.
Just an FYI here, but this thread is from Oct 2009 and it was this guys only post. So he is no longer around.
oh manmy bad just seen it was a top post. had to put my 2cents in. wish i had thought about taking the wheels off though that **** was funny:D
Blah - we've been gotten!